Simple Tips for Saving Water Outdoors
Homes with automatic sprinkler systems can use about 50 percent more water outdoors than those without them. Check your summertime water bill—how does your warmer weather water use compare to winter months?
Here are some tips for keeping water use under control:
- Timing is everything: Know how much water your landscape actually needs before you set your sprinkler. Your local utility company can offer recommendations for how much water certain plants need in your region and best times to water. Generally, it's best to water lawns and landscapes in the early morning and evening, after the sun goes down, because significant amounts of water can be lost due to evaporation during the heat of the day.
- Look for the label: If your system uses a clock timer, consider upgrading to a WaterSense labeled controller which acts like a thermostat for your lawn, using local weather data to determine when and how much to water, reducing waste and improving plant health. Replacing a standard clock timer with a WaterSense labelled irrigation controller can save an average home nearly 8,800 gallons of water annually.
- Go with a pro: Contractors certified through a WaterSense labeled program can audit, install, or maintain home irrigation systems to ensure water isn't wasted. Make sure you ask for credentials.
- Tune up your system: Inspect irrigation systems and check for leaks and broken or clogged sprinkler heads. Fix sprinkler heads that are broken or spraying on the sidewalk, street, or driveway.
- Play zone defense: When planting, assign areas of your landscape different hydrozones depending on sun/shade exposure, soil and plant types, and type of sprinklers, then adjust your irrigation system or watering schedule based on those zones' specific needs. This helps you avoid over-watering some areas or under-watering others.
Even if your home doesn't have a sprinkler system, there are a number of simple steps you can take to promote a healthier lawn and garden with less water this summer:
- Step on it: Grass doesn't always need water just because it's hot out. Step on the lawn, and if the grass springs back, it doesn't need water. An inexpensive soil moisture sensor can also show the amount of moisture at the plant's roots and discourage overwatering.
- Leave it long: Raise your lawn mower blade. Longer grass promotes deeper root growth, resulting in a more drought-resistant lawn, reduced evaporation, and fewer weeds.
- Give your hose a break: Sweep driveways, sidewalks, and steps rather than hosing them off. And don't forget to check for leaks at your spigot connection and tighten as necessary.
Source: EPA WaterSense